EPISODE 136 THE LITTLE SKEOCH ABOUT TO BE REBORN…thanks to a group of men who had a dream
and the collecive skills to build a lost car.
alan skeoch
Oct. 2020
Thanks to Geoff Allison and his friends the Little Skeoch is about to be reborn. What a surprise. Even Covid 19
cannot stop these fellows. They have had help from donors of course but the prize…the little Skeoch…is their’s.
Yestereday when I sent out Episode 135 I sent a copy to Geoff but did not expect such a response because
the newspaper said Scotland was in lockdown due to Covid 19. Well the virus has slowed things down
but the little Skeoch is now running. If you read Geoff’s letter below and follow his instructions you will
be able to see the little car zipping from one garage to another. The men have even been able to
determine the lovely deep red colour of the 1920 Skeoch.
Geoff has given me permission to reprint his letter
On Oct 7, 2020, at 7:37 AM, Geoff Allison
Good morning Alan,
Sorry to hear of your sad loss, I hope your son is coping especially with the pandemic on top.
The pandemic closed our Shed in March, and the lockdown rules in Scotland, being the most stringent in the UK, mean that we are unlikely to re-open before April 2021. We are trying to keep our previously active members in touch with each other via email, telephone and video conferencing. We have also managed to move some of the Shed activities to individual’s homes so they can progress their projects within isolation/distancing rules. More than half our members have managed to keep projects such as 3D printing face masks, engraving, bicycle and engine refurbishment alive – and the biggest of these re-locations was the Skeoch. I recommend our Skeoch webpage https://dalbeattiemensshed.co.uk/skeoch to you for a brief history of how the project has progressed. We moved the car and workshop equipment out in June, primarily to improve the health and wellbeing of one of our members with advanced Parkinson’s. Since that time the project has accelerated almost to completion. Apart from some minor adjustments the vehicle [less hood(canopy) and radiator badge] is finished awaiting space in a paint shop for finish painting – see the September update on our website. I am re-scheming the unveiling of the finished car as our original intentions have been crushed by the pandemic. We were hoping to display the car at the 2021 Scottish Motor Show, 100 years after it’s first exhibition there in February 1921 – but the Show will not run in 2021. Our reserve intention was to display the car in the Glasgow Transport Museum thus keeping the launch near to where James Skeoch’s daughter resides, and close to an airport for people wishing to fly in – the museums are closed for the foreseeable future too. At present it’s looking like a triple launch: we will display the car in the picture window of Paterson ATV [ https://www.patersonatv.co.uk/] for a couple of weeks after completion for Dalbeattie townsfolk; I am working with the Chief Executive of the Scottish Motor Trade Association [SMTA own the Scottish Motor Show], to put together a multipage article for their trade magazine [https://content.yudu.com/web/fiqy/0A4403c/autoretailerissue02/html/index.html] aiming for the February 2021 edition; and finally I am working with the organisers of the RHS, Royal Highland Show, [https://www.whatsoninedinburgh.co.uk/event/084117-royal-highland-show-2021/] to see if we can display the Skeoch on the Dumfries & Galloway stand in June 2021. The RHS is held adjacent to Edinburgh airport so is close to Glasgow and James Skeoch’s daughter as well as being convenient for anyone flying in.
Picking up on a couple of items in your 132-4 newsletters
You were chasing Skeoch heritage in Bute. Before our Shed closed for the pandemic we had a visit from a relative of one of our members who has gaelic as is his first language, and the Skeoch name was discussed. The visitor reminded us that in Scots gaelic the root ‘ach’ means from, and Skeoch is probably a corruption of Sgitheanach meaning from Skye! Just a thought.
I liked your pictures in 132 – I toured NE USA and SE Canada with my daughter in August 2019 and spent some time in Toronto, we enjoyed the scenery but it was not as colorful as your photos. My daughter returned to Toronto with 2 of her colleagues in October 2019 too. My annual break with my daughter this year was Nashville, Memphis, Natchez and New Orleans in September but that was cancelled due to the pandemic.
Good to hear from you again, stay well
Geoff
A piece of software discovered by Dave Higginbottom designed to colourise old monochrome photos has revealed more detail on a profile picture of the Skeoch (see image) and revises our understanding of the tyre and coachwork finishes.
William Kennedy offered to share the proceeds of his 9th June 2019 Orroland Gardens open day earlier this year, giving us a target date for having a rolling chassis to display. Planning this event has galvanised fundraising, procurement and build activity.
Both the engine and gearbox restorations have been completed to the limit of parts available, along with a part 1920s B&B carburettor donated by Keith Dennison. This puts pressure on procuring springs and wheels which, as major cost items, in turn puts pressure on fundraising.
The second tranche of Dalbeattie Rotary’s donation gives us the confidence to order springs from Jones Springs (Engineering) Ltd of Wednesbury, and wheels from Barrie Brown of Windygates, Fife.
Later in the month Keith and Chris Dennison visit to donate a beautifully restored magneto. Work on the chassis concentrates on finishing, dressing, mounting and aligning the pedal, brake and countershafts.
Good old-fashioned fabrication skills resolved two of the our ongoing build difficulties – a new hand built starting handle & support bracket is now robust enough for repeated use; and a process of hand beating long louvres into bonnet side panels was developed using a profiled concave die machined by Donald. Coachwork progressed with the fabrication of rear wings and front wings (inner and outer). Work started on the upholstery, rubber flooring and windscreen support frame.
An oil leak appeared during tuning and adjusting engine controls which will probably require engine removal and rebuild to resolve. We are still looking for a better carburettor which is configured so that the fuel supply line doesn’t run too close to the exhaust.
The full story is unfolding step by step. I hope you feel the same escitement we feel. It is almost too hard to believe.
